Fireclass Fire Alarm Conventional

J408
​Designed and made according to EN54 standards, the J408 is a microprocessor based control panel for small to medium applications. It has 8 zones, each supports up to 32 detectors, for a maximum of 256 detectors.
Each detection zone has an alarm-repeat output for selective management in the event of fire.
The control panel has supervised, silenceable alarm-outputs for self-powered sirens, piezo electric sirens, fire bells, flashers, telephone diallers, etc. This easy-to-use control panel is protected by a lockable frontplate which allows operational access to authorized personnel only.
The optional Software in Windows™ environment, allows full systems management of events memory, files, reset and all the programmable functions provided by the control panel.

Designed and made according to EN54 standards, the J424 is a microprocessor based control panel for medium and large applications. It has 8 zones main board and supports two J400-EXP8 expander modules, for a total of 24 zones and 512 detectors.

 
Each detection zone is equipped with an alarm repeat output for selective alarm management in the event of fire. The control panel has supervised and silenceable alarm outputs for the control of the self-powered sirens, piezoelectric sirens, fire bells, flashers, telephone diallers, etc. This easy-to-use control panel is protected by a lockable front plate which allows operational access to authorized personnel only.
 
The J424 control panel is also available with a backlit display, which shows all the information regarding the control panel status. The optional software in Windows™ environment, allows full systems management of events memory, files, reset and all the programmable functions provided by the control panel.

General Features J424-8

 
  • Fully approved.
  • Optional extinguishment module EN12094-1 approved.
  • 8 zones mainboard.
  • Supports 2 J400-EXP8 expander modules, total 24 zones.
  • Up to 32 devices can be connected to each zone.
  • Gas zone compatible with 4 – 20 mA gas detectors.
  • One alarm-repeat output for each input zone.
  • Manual call point recognition.
  • Signals missing detectors.
  • 2 supervised, silenceable, bypassable 24 V alarm output for sirens and activation.
  • Silenceable fault warning output for the activation of signalling and auxiliary devices.
  • Supervised fire output for telephone dialler activation.
  • Programmable open-collector output.
  • Dry contact alarm-relay for the activation of auxiliary devices.
  • Day/Night mode.
  • Alarm verification time.
  • Programmable restoral and reset times.
  • Programmable from PC or keypad.
  • 50 event log viewed via PC.
  • Alarm/fault memory activated until next reset.
  • Command for silencing sirens.
  • Keypad commands require key or pin code.
  • Repeater available.
  • Optional backlit display.
 

General Features J408

  • Fully approved.
  • Optional extinguishment module EN12094-1 approved.
  • 8 zones mainboard.
  • Supports 2 J400-EXP8 expander modules, total 24 zones.
  • Up to 32 devices can be connected to each zone.
  • Gas zone compatible with 4 – 20 mA gas detectors.
  • One alarm-repeat output for each input zone.
  • Manual call point recognition.
  • Signals missing detectors.
  • 2 supervised, silenceable, bypassable 24 V alarm output for sirens and activation.
  • Silenceable fault warning output for the activation of signalling and auxiliary devices.
  • Supervised fire output for telephone dialler activation.
  • Programmable open-collector output.
  • Dry contact alarm-relay for the activation of auxiliary devices.
  • Day/Night mode.
  • Alarm verification time.
  • Programmable restoral and reset times.
  • Programmable from PC or keypad.
  • 50 event log viewed via PC.
  • Alarm/fault memory activated until next reset.
  • Command for silencing sirens.
  • Keypad commands require key or pin code.
  • Repeater available.
  • Optional backlit display.
 

Call Now